MagnaFlow Exhaust Products California Grade CARB Compliant Direct-Fit Catalytic Converter for Ford
Part # 334301SKU MAG334301
Set your vehicle above for a fit verdict. 9 vehicles listed below.
| Brand | MagnaFlow Exhaust Products |
|---|---|
| Part type | Catalytic Converter |
| Air Tube Adaptable | Yes |
| Air Tube Count | 1 |
| Body Material | Stainless Steel |
| Body Type | Clam-Shell |
| California Air Resources Board (CARB) Certified | Yes |
| CARB Executive Order Number | D-193-161 |
| Clamps Included | No |
| Finish | Stainless |
| Grade Type | Regular |
| Hangers Included | Yes |
| Heat Shield Attached | Yes |
| Heat Shield Material | Aluminized Steel |
| Inlet Gasket Included | No |
| Inlet Mounting Hardware Included | No |
| Inlet Type | Flange |
| Material | Stainless Steel |
| New York Certified | Yes |
| Outlet Gasket Included | No |
| Outlet Mounting Hardware Included | No |
| Outlet Type | Pipe Connection |
| Overall Length | 59 in |
| Sensor Port Count | 0 |
| Series | California |
| Substrate Material | Ceramic |
| Tube Material | Stainless Steel |
| Universal Or Specific Fit | Specific |
| UPC / GTIN | 00841380085122 |
- Durable 308 stainless steel MIG welds
- Simplifies installation with essential gaskets and hardware being included in the box
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Description
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 334301. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
More from MagnaFlow Exhaust Products
| 51356 | $304.00 |
| 59959 | $243.00 |
| 49754 | $684.00 |
| 5551206 | $1,955.00 |
| 23149 | $686.00 |
| 99353HM | $282.00 |
| Year | Make | Model | Engine |
|---|---|---|---|
| 1984 - 1986 | Ford | E-150 Econoline | 4.9L 300 I6 |
| 1984 - 1986 | Ford | E-150 Econoline Club Wagon | 4.9L 300 I6 |
| 1984 - 1986 | Ford | E-250 Econoline | 4.9L 300 I6 |
| 1984 - 1986 | Ford | E-250 Econoline Club Wagon | 4.9L 300 I6 |
| 1984 - 1986 | Ford | E-350 Econoline | 4.9L 300 I6 |
| 1984 - 1986 | Ford | E-350 Econoline Club Wagon | 4.9L 300 I6 |
| 1984 - 1986 | Ford | F-150 | 4.9L 300 I6 |
| 1984 - 1986 | Ford | F-250 | 4.9L 300 I6 |
| 1984 - 1986 | Ford | F-350 | 4.9L 300 I6 |