Also carried

02 Processor W/Amp Connector, Superflow

Used to connect to input box on dynos

Livewire TS / X4 Exhaust Gas Temperature Sensor Kit

• Plug And Play Monitoring
• Stainless Steel EGT Probe
• Simple Easy To Install And Set Up

AccuSeal Clamp 3in T-304 Stainless Steel

AccuSeal clamp design provides 360 degrees of clamping force in a clean, easy to install, one bolt package.

Floor & Tunnel Shield II 21" x 24" 050501

• Constructed From 10 Mil Aluminum
• Just Trim Peel And Stick
• Peel and stick adhesive backing

0.375in. 90deg. Bend (10 Pack) Barbed Performance Exhaust Hangers

• Pack of 10
• Barbed design
• High-strength support

Bosch Replacement UEGO Sensor

• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Connector and pins included
• Replacement sensor only

AccuSeal Clamp 2.25in T-304 Stainless Steel

AccuSeal clamp design provides 360 degrees of clamping force in a clean, easy to install, one bolt package.

Ultra-Seal Collector Gaskets - 2-1/2 Inch

• Steel Expanded Metal Core
• Resists Deteriorating
• Anti-stick Properties

Dynaflex Tru-Seal Band Clamp (Flat Style) 2.5 T-304 Stainless Steel

• Use on butt joint connections
• 3" wide flat band provides even clamping force
• Allows connections to be easily disassembled if needed

Dynaflex Tru-Seal Band Clamp (Flat Style) 3 T-304 Stainless Steel

• Use on butt joint connections
• 3" wide flat band provides even clamping force
• Allows connections to be easily disassembled if needed

Header Collector Ball Flange Kit

• 16 Gauge Aluminized Steel Tubing
• Leak-free Ball and Socket Seal
• Flowmaster Quality

Heavy-Duty Band Clamp - 3.25"

• 3.25” (82.5mm) connection
• Heavy-duty band clamp
• Easy to install and remove

AccuSeal Clamp 2.5in T-304 Stainless Steel

AccuSeal clamp design provides 360 degrees of clamping force in a clean, easy to install, one bolt package.

Ultra-Seal Collector Gaskets - 3-1/2 Inch

• Expanded steel core for stability and maximum torque retention to eliminate failure
• Graphite-impregnated facing for excellent heat resistance
• Anti-stick properties for easy removal on disassembly

Heavy-Duty Band Clamp - 2.75"

• 2.75” (70mm) connection
• Heavy-duty band clamp
• Easy to install and remove

Header Collector Ball Flange Kit

• 16 Gauge Aluminized Steel Tubing
• Leak-free Ball and Socket Seal
• Flowmaster Quality

Header Collector Ball Flange Kit

• 16 Gauge Aluminized Steel Tubing
• Leak-free Ball and Socket Seal
• Flowmaster Quality

Header Collector Ball Flange Kit

• 16 Gauge Aluminized Steel Tubing
• Leak-free Ball and Socket Seal
• Flowmaster Quality

Heat Shield

• Stainless Steel Muffler Clamps
• Reduces Interior Noise
• Flowmaster Quality

Heat Shield

• Stainless Steel Muffler Clamps
• Reduces Interior Noise
• Flowmaster Quality

Heat Shield

• Stainless Steel Muffler Clamps
• Reduces Interior Noise
• Flowmaster Quality

No-Weld O2 Sensor Mount

• No need to weld O2 bung into exhaust.
• 2.5in pipe diameter.
• Made of stainless steel.

Low-Profile Barrel Band Clamp - 3"

• Stainless steel construction
• 3” (76mm) connection
• Easy to install and remove

GAUGE; PYROMETER (EGT); 2 1/16in.; 1600deg.F; DIGITAL STEPPER MOTOR; Z-SERIES

• 12 And 16V Compatible
• Incl. Type-K Thermocouple; Wiring Harness
• Incl. Mounting Hardware/Instructions

Ultra-Seal Collector Gaskets - 3 Inch

• Expanded steel core for stability and maximum torque retention to eliminate failure
• Graphite-impregnated facing for excellent heat resistance
• Anti-stick properties for easy removal on disassembly