Sensors

Livewire TS / X4 Exhaust Gas Temperature Sensor Kit

• Plug And Play Monitoring
• Stainless Steel EGT Probe
• Simple Easy To Install And Set Up

Bosch Replacement UEGO Sensor

• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Connector and pins included
• Replacement sensor only

GAUGE; PYROMETER (EGT); 2 1/16in.; 1600deg.F; DIGITAL STEPPER MOTOR; Z-SERIES

• 12 And 16V Compatible
• Incl. Type-K Thermocouple; Wiring Harness
• Incl. Mounting Hardware/Instructions

Atomic, O2 Sensor Wideband

Atomic EFI Support Component

Bosch Replacement UEGO Sensor

• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Connector and pins included
• Replacement sensor only

GAUGE; PYROMETER (EGT); 2 1/16in.; 1600deg.F; DIGITAL STEPPER MOTOR; PHANTOM

• 12 And 16V Compatible
• Incl. Type-K Thermocouple; Wiring Harness
• Incl. Mounting Hardware/Instructions

GAUGE; PYROMETER (EGT); 2 1/16in.; 1600deg.F; DIGITAL STEPPER MOTOR; PHANTOM II

• Clear Visibility During Nighttime Use
• A Self Calibration Sequence During Power Up
• 12 And 16 Volt Compatible/Compatible With

GAUGE; PYROMETER (EGT); 2 1/16in.; 2000deg.F; DIGITAL STEPPER MOTOR; PHANTOM

• 12 And 16V Compatible
• Incl. Type-K Thermocouple; Wiring Harness
• Incl. Mounting Hardware/Instructions

SENSOR; O2; REPLACEMENT; WIDEBAND AIR/FUEL

• Wide Band O2 Censor

Bosch 4.2LSU Wideband Sensor W/ Stainless Tall Manifold Bung

• Accurate to 0.1 AFR
• Specifically designed for use with AEM Wideband UEGO controllers
• Includes sensor and weld-on stainless-steel tall manifold bung

FAE Wideband "Replacement" Sensor

• Replacement for 0300 with 0400 serial number
• Improved durability compared to Bosch 4.9.
• Faster response time.

GAUGE; PYROMETER; 2 1/16in.; TWO CHANNEL; SELECTABLE; COBALT ELITE DIGITAL

• 12 And 16 Volt Compatible
• Program Unique Alarms For Each Channel
• 0-5V Analog Voltage Output

GAUGE; PYROMETER (EGT); 2 1/16in.; 1600deg.F; DIGITAL STEPPER MOTOR; SPORT-COMP

• 12 And 16V Compatible
• Incl. Type-K Thermocouple; Wiring Harness
• Incl. Mounting Hardware/Instructions

GAUGE; PYROMETER (EGT); 2 1/16in.; 1600deg.F; DIGITAL STEPPER MOTOR; ULTRA-LITE

• 12 And 16V Compatible
• Incl. Type-K Thermocouple; Wiring Harness
• Incl. Mounting Hardware/Instructions

GAUGE; PYROMETER (EGT); 2 1/16in.; 1600deg.F; STEPPER MOTOR; CARBON FIBER

• Air Fuel Ratio Gauge
• 1 Year Limited Warranty
• 12 And 16 Volt Compatible

GAUGE; PYROMETER (EGT); 2 1/16in.; 2000deg.F; DIGITAL STEPPER MOTOR; COBALT

• Striking New Look
• 1 Year Limited Warranty
• 12 And 16 Volt Compatible

GAUGE; PYROMETER (EGT); 2 5/8in.; 1600deg.F; DIGITAL STEPPER MOTOR; PRO-COMP

• 12 And 16V Compatible
• Incl. Type-K Thermocouple; Wiring Harness
• Incl. Mounting Hardware/Instructions

No-Weld O2 Sensor Mount

• No need to weld O2 bung into exhaust.
• 2in pipe diameter.
• Made of stainless steel.

No-Weld O2 Sensor Mount

• No need to weld O2 bung into exhaust.
• 2.5in pipe diameter.
• Made of stainless steel.

No-Weld O2 Sensor Mount

• No need to weld O2 bung into exhaust.
• 3in pipe diameter.
• Made of stainless steel.

Oxygen Sensor for Pro-Flo 1 EFI, Bosch 3-Wire, Narrow-Band

The Edelbrock #3591 is a Replacement Narrow-Band Oxygen Sensor For ProFlo1 (#3500 Series) EFI Systems.

QTY 2 K-Type Closed Tip Thermocouple

• Comes with everything needed to attach to our CAN EGT Module
• Includes K-Type Closed Tip Thermocouple, Inconel sheath, 1/8" NPT compression fitting, 10-foot extension harness
• Sold as a pair

QTY 4 K-Type Closed Tip Thermocouple

• Comes with everything needed to attach to our CAN EGT Module
• Sold in a set of 4
• Includes K-Type Closed Tip Thermocouple, Inconel sheath, 1/8" NPT compression fitting, 10-foot extension harness

RTD-Type Temperature Sensor

• EGT sensor kit for 30-0305 EGT gauge
• Female thread end
• Sold individually or in 2-or 4-packs

Stainless Tall Manifold Bung

• Stainless steel construction
• Finned design enhances cooling
• Ideal for boosted applications